.

.

wduuii digitalni auto-multimetar _BOS_ AT80E 6000 apsolutna Zaslon Digitalni auto-multimetri

wduuii digitalni auto-multimetar _BOS_ AT80E 6000 apsolutna Zaslon Digitalni auto-multimetri

HRK 176.13

Na skladištu
Dostupno za naručivanje

Niska potrošnja energije CMOS Double integral A/D conversion integrated circuit, automatski reset,automatski prikaz polariteta, Datahold, niska razina napunjenosti baterije, indikator dometa akcije.Mjerenje kapaciteta : 10p F~100m F.Mjerenje temperature : -40℃~1000℃.Osnovna točnost dc : +0,5% (prikaz 6000).Zaštita od preopterećenja u punom rasponu.Specifikacija : napajanje : jedna baterija od 9 v (tip NEDA1604, 6 F22 ili ekvivalentan tip)(ne dolazi u kompletu) Indikator niskog napona baterije : yes Environment uvjet : 75%Radna temperatura : 0 ° c~40 ° c Relativna vlažnost

Karakteristike prijedloga

Power Supply:
one 9V battery (NEDA1604, 6F22 type or equivalent type)(not included)
Low battery voltage indication:
yes
Environment condition:
75%
Operation temperature:
0℃~40℃ Relative humidity
Storage Temperature:
-10℃~50℃ Relative humidity
Guaranteed accuracy temperature:
23℃+5℃
Relative humidity:
Environmental humidity:
23℃+5℃
Relative humidity:
Size:
180*88*53mm/7.1*3.5*2.1in
Weight:
Approx.539g/19oz
Package list:
1 x Multimeter(battery not included) :
1 x  instructions :
2 x test lead :
1 x thermocouple :
2 x crocodile clip :
Safety rules and precautions:
Please read the instruction manual carefully before use. :
It is strictly prohibited to use with the rear cover uncover, otherwise it will be subject to electric shock. :
Before use should check the test leads Insulation, no damage and disconnection. :
The input signal level is not allowed to exceed the specified limit to protect against electric shock and damage to the instrument. :
Do not rotate the function / range switch while measuring. :
Measuring the potential difference between the common end COM and Earth shall not exceed 1000V, in case of electric shock. :
Under the circumstances that the measured voltage is higher than DC60V and AC30V , should be careful to prevent electric shock. :
When LCD displaysymbol, indicating that the battery voltage is insufficient, should replace the battery in time to ensure the measurement accuracy. :
Replacement of fuses within the instrument should be of the same type. :
The products of our shop have many characteristics, you are welcome to visit our shop to visit other style products, if you have any questions, please feel free to ask questions, we will reply to your que :
Kupci po vlastitom izboru